Tel: 0129-4001010 Phone: +91 730 321 5033
Email: cs@absoluteveritas.com
Product Certification scheme - ISI Mark
Bureau of Indian Standards (BIS) offers an ISI Marking scheme for all products covered under the Mandatory List. ISI mark is a quality mark used to depict the grade for company products in India. Every product which put this mark reflects the trust and safety of the product.
WHO CAN APPLY?
The manufacturers, which have their factory location outside India can apply under ISI Mark Scheme. They shall: Ensure conformity of their product(s) to applicable Indian Standard Specifications. Shall have all manufacturing machineries/facilities at their factory premises. Shall have all arrangements/equipments in their factory premises for testing of the product(s) as per applicable ISS. Shall have competent testing personnel in their lab to test the product(s) as per applicable ISS. Must accept the Scheme of Testing & Inspection (STI), Marking Fee and Terms & Conditions of license.
PROCESS TIME
Total time for Certification will be approx. 4-5 months from the date of submission of Application documents. Note: Separate application is required to be submitted for each product/Indian Standard and for each factory location.
Why ABSOLUTE VERITAS (AV)?
Absolute Veritas (AV) will handle end to end pre-registration request, sample preparation, documentation, test report and application process for BIS Certification Services.
Products under ISI Mark Registration
| Sr. No. | IS No. | Product |
| Cement | ||
| 1 | IS 12330 | Sulphate Resisting Portland Cement |
| 2 | IS 12600 | Low heat Portland Cement |
| 3 | IS 1489 (Part 1) | Portland Pozzolana Cement-Part1 Fly-ash based |
| 4 | IS 1489 (Part 2) | Portland Pozzolana Cement-Part 2 Calcined clay based |
| 5 | IS 269 | Ordinary Portland Cement |
| 6 | IS 3466 | Masonry Cement |
| 7 | IS 455 | Portland Slag Cement |
| 8 | IS 6452 | High Alumina Cement for Structural use |
| 9 | IS 6909 | Super sulphated cement |
| 10 | IS 8041 | Rapid hardening Portland cement |
| 11 | IS 8042 | White Portland Cement |
| 12 | IS 8043 | Hydrophobic Portland Cement |
| 13 | IS 8229 | Oil well Cement |
| Household Electrical Goods | ||
| 14 | IS 12640 (Part 1) | Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs) |
| 15 | IS 12640 (Part 2) | Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs) |
| 16 | IS 13010 | AC watt-hour meters, class 0.5, 1 & 2 |
| 17 | IS 13779 | AC static watt-hour meters, class 1 & 2 |
| 18 | IS 14697 | AC static transformer operated watt-hour and VAR-hour meters, |
| class 0.2S & 0.5S | ||
| 19 | IS 15111 (Part 1 & 2) | Self Ballasted Lamps for General Lighting Services – Part 1 : |
| Safety Requirements & Part 2 : Performance Requirements | ||
| 20 | IS 302 (Part 2/Sec 3) | Safety of household and similar electrical appliances –Electric iron |
| 21 | IS 302 (Part 2/Sec 201) | Safety of household and similar electrical appliances–Electric immersion water-heaters |
| 22 | IS 302 (Part 2/Sec 202) | Safety of household and similar electrical appliances –Electric stoves |
| 23 | IS 302 (Part 2/Sec 30) | Safety of household and similar electrical appliances-Room heaters |
| 24 | IS 3854 | Switches for domestic and similar purposes |
| 25 | IS 418 | Tungsten filament general service electric lamps (upto100 W ) |
| 26 | IS 694 | PVC insulated cables for working voltages up to and including 1100V |
| 27 | IS 8828 * | Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations |
| 28 | IS 9968 (Part 1) | Elastomer insulated cables (Part.1): For working voltages up to and including1100 V |
| Batteries | ||
| 29 | IS 8144 | Multi-Purpose dry batteries |
| Food & Related Products | ||
| 30 | IS 15757 | Follow–up formula –complimentary foods |
| 31 | IS 11536 | Processed cereal based complementary foods |
| 32 | IS 1165 | Milk-powder |
| 33 | IS 1166 | Condensed milk, partly skimmed and skimmed condensed milk |
| 34 | IS 12176 | Sweetened ultra high temperature treated condensed milk |
| 35 | IS 13334 (Part 1) | Skimmed milk-powder, standard grade |
| 36 | IS 13334 (Part 2) | Skimmed milk-powder, extra grade |
| 37 | IS 13428 | Packaged Natural Mineral Water |
| 38 | IS 14433 | Infant milk substitutes |
| 39 | IS 14542 | Partly skimmed milk powder |
| 40 | IS 14543 | Packaged Drinking Water (Other than Packaged Natural Mineral Water) |
| 41 | IS 1656 | Milk-cereal based weaning foods |
| 42 | IS 3470 | Hexane, Food grade |
| 43 | IS 14625 | Plastic Feeding Bottles |
| 44 | IS 5168 | Glass Feeding Bottles |
| Oil Pressure Stoves | ||
| 45 | IS 10109 | Oil pressure stove, offset burner type |
| 46 | IS 2787 | Multi-burner oil pressure stoves |
| 47 | IS 1342 | Oil pressure stoves |
| Automobile Accessories | ||
| 48 | IS 13098 | Automotive vehicles –Tubes for pneumatic tyres |
| 49 | IS 15627 | Automotive vehicles–Pneumatic tyres for two and three-wheeled motor vehicles |
| 50 | IS 15633 | Automotive vehicles-Pneumatic tyres for passenger car vehicles–Diagonal and radial ply |
| 51 | IS 15636 | Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply |
| Cylinder, Valves and Regulation | ||
| 52 | IS 14899 | Liquefied petroleum gas containers for automotive use |
| 53 | IS 15100 | Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use |
| 54 | IS 3196 (Part 4) | Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases |
| 55 | IS 3196 (Part 1) | Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG) |
| 56 | IS 3196 (Part 2) | Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG. |
| 57 | IS 3224 | Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders |
| 58 | IS 3745 | Yoke Type Valve Connection for Small Medical Gas Cylinders |
| 59 | IS 7142 | Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity |
| 60 | IS 7285 (Part 1) | Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders |
| 61 | IS 7285 (Part 2) | Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2) |
| 62 | IS 7302 | Valve fittings for gas cylinder valves for use with breathing apparatus |
| 63 | IS 7312 | Welded and seamless steel dissolved acetylene gas cylinders |
| 64 | IS 8737 | Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders |
| 65 | IS 8776 | Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity |
| 66 | IS 9798 | Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures |
| Medical Equipment | ||
| 67 | IS 3055 (Part 1) | Clinical thermometers :Part1 Solid stem type |
| 68 | IS 3055 (Part 2) | Clinical thermometers :Part 2 Enclosed scale type |
| 69 | IS 7620 (Part 1) | Diagnostic Medical X-Ray Equipment |
| Steel Products | ||
| 70 | IS 1785 (Part 1) : 1983 | Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire |
| 71 | IS 1785 (Part 2) : 1983 | Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire |
| 72 | IS 6003:2010 | Indented wire for Pre-stressed concrete |
| 73 | IS 6006:2014 | Uncoated stress relieved strand for Pre-stressed concrete |
| 74 | IS 13620:1993 | Fusion bonded epoxy coated reinforcing bars |
| 75 | IS 14268:1995 | Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete |
| 76 | IS 277:2003 | Galvanized steel sheets ( plain and corrugated) |
| 77 | IS 2002:2009 | Steel plates for pressure vessels for intermediate and high temperature service including boilers |
| 78 | IS 2041:2009 | Steel plates for pressure vessels used at moderate and low temperature |
| 79 | IS 2830:2012 | Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose |
| 80 | IS 1786:2008 | High strength deformed steel bars and wires for concrete reinforcement. |
| 81 | IS 648:2006 | Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) |
| 82 | IS 3024:2015 | Grain oriented electrical steel sheet & strip (CRGO) |
| 83 | IS 15391:2003 | Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification. |
| 84 | IS 2062:2011 | Hot rolled medium and high tensile structural steel |
| 85 | IS 432 : Part 1:1982 | Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars |
| 86 | IS 432 : Part 2:1982 | Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire |
| 87 | IS 513 (Part-1): 2016 | Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose |
| 88 | IS 513 (Part-2): 2016 | Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel |
| 89 | IS 1079: 2017 | Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification |
| 90 | IS 1875:1992 | Carbon steel billets, blooms, slabs and bars for forgings |
| 91 | IS 2879:1998 | Mild steel for metal arc welding electrodes |
| 92 | IS 3502:2009 | Steel Chequered Plates |
| 93 | IS 5872:1990 | Cold Rolled Steel Strips (Box Strappings) |
| 94 | IS 5986: 2017 | Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification |
| 95 | IS 6240:2008 | Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders |
| 96 | IS 7283:1992 | Hot Rolled bars for production of bright bars and machined parts for engineering applications |
| 97 | IS 7887:1992 | Mild steel wire rods for general engineering purposes |
| 98 | IS 10748:2004 | Hot Rolled Steel Strip for Welded Tubes and Pipes |
| 99 | IS 11513:2017 | Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification |
| 100 | IS 15647:2006 | Hot rolled steel narrow width strip for welded tubes and pipes |
| 101 | IS 7904:1995 (This standard shall cease to exist after 18th November, 2018) | High carbon steel wire rods- Specification |
| 102 | IS 14246:2013 | Continuously pre-painted galvanized steel sheets and coils |
| 103 | IS 15965:2012 | Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain) |
| 104 | IS 280: 2006 | Mild steel wire for General Engineering purposes |
| 105 | IS 1835:1976 | Round Steel wire for ropes |
| 106 | IS 3975:1999 | Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables |
| 107 | IS 4368:1967 | Alloy Steel billets, blooms and slabs for forging for general engineering purposes. |
| 108 | IS 4454 (Part 1) : 2001 | Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire. |
| 109 | IS 4454 (Part 2): 2001 | Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire. |
| 110 | IS 4824:2006 | Bead Wires for Tyres |
| 111 | IS 11169 (Part 1): 1984 | Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels |
| 112 | IS 11587:1986 | Structural Weather resistant steel. |
| 113 | IS 15103: 2002 | Fire resistant Steel- Specification |
| 114 | IS 15914:2011 | High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. |
| 115 | IS 15961:2012 | Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain) |
| 116 | IS 15962:2012 | Structural Steel for Building for Structures with improved seismic Resistance |
| 117 | IS 6527:1995 | Stainless Steel wire Rod |
| 118 | IS 6528:1995 | Stainless Steel Wires |
| 119 | IS 6603:2001 | Stainless Steel Bars and Flats |
| 120 | IS 5522:2014 | Stainless Steel sheets and strips for utensils- Specification |
| | ||
| 121 | IS 6911:2017 | Stainless Steel Plate, Sheet and Strip- Specification |
| 122 | IS 15997:2012 | Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification |
| 123 | IS 8329:2000 | Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage |
| 124 | IS 9523:2000 | Ductile iron fittings for pressure pipes for water, gas and sewage |
| 125 | IS 1161:2014 | Steel tubes for structural purposes |
| 126 | IS 1239 (Part 1):2014 | Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes |
| 127 | IS 4270:2001 | Steel tubes used for water-wells (upto 200 mm dia) |
| Electrical Transformers | ||
| 128 | IS 1180 (Part 1) | Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed |
| Electrical Motors | ||
| 129 | IS 12615 | Energy Efficient Induction Motors-Three Phase Squirrel Cage |
| Capacitors | ||
| 130 | IS 2993 | A.C. motor capacitors |
| 131 | IS 13340 | Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V |
| 132 | IS 13585 Part 1 | Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation |
| Chemicals & Fertilizers | ||
| 133 | IS 252:2013 | Caustic Soda -Specification |
| Kitchen Appliances | ||
| 134 | IS 302 (Part 2/Section 14) | Hand-held Blender |
| 135 | IS 4250 | Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer |
| Domestic Water Heaters for use with LPG | ||
| 136 | IS 15558 | Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas |
