Tel: 0129-4001010 Phone: +91 730 321 5033
Email: cs@absoluteveritas.com
BIS REGISTRATION FOR PLASMA/LCD/LED TELEVISION IS 616:2010
INTRODUCTION
.jpg)
A Plasma Display Panel (PDP) is a type of flat-panel display utilizing small cells filled with plasma, an ionized gas responsive to electric fields. Plasma TVs were among the first large flat-screen options available to the public. LED, or Light Emitting Diodes, offer higher efficiency and lower power consumption compared to LCD TVs, saving up to 30% power. They also come in versatile sizes and thicknesses, making them cost-effective. The Bureau of Indian Standards has included Plasma/LCD/LED Televisions with screen sizes of 32 inches and above in the Compulsory Registration Scheme, mandating BIS Registration online before launch or import into the Indian Market. This registration ensures the right to manufacture, import, store, and sell or distribute Plasma/LCD/LED TVs in India, safeguarding public health as TVs are ubiquitous in households.
BASIC REQUISTE
For Indian BIS Certification, adherence to four essential pillars is imperative. Without meeting these criteria, applicants cannot proceed with the certification process. To obtain BIS Registration, applicants must satisfy the following prerequisites:
(1).jpg)
-
Manufacturer: Indian BIS Licenses are exclusively granted to manufacturers, not importers or sellers. While importers can represent foreign manufacturers and submit applications to BIS, the final license is issued only to the manufacturer.
-
Manufacturing Address: Accurate manufacturing address details must be provided in the documentation. If a manufacturer has multiple factory locations for a single product, separate BIS Licenses are necessary for each location.
-
Product: Each distinct product necessitates its own license. However, if multiple models fall under the same product category, a single license/registration number will cover all models within that category. In essence, one license suffices for one product category with various models.
-
Brand/ trademark: Every brand or trademark associated with the product requires its own BIS license.
Adhering to these requirements ensures compliance with BIS regulations, facilitating the certification process and enabling manufacturers to access the Indian market seamlessly.
BIS REGISTRATION REQUIREMENT
The BIS registration procedure for PLASMA/LCD/LED TELEVISION IS 616:2010 is subject to variation depending on the geographic location of the manufacturing unit. Notably, the BIS registration process differs between domestic (Indian) manufacturers and foreign manufacturers.
A)PROCESS FOR FOREIGN MANUFACTURER
|
STEP:1 |
Appoint an Indian Representative to represent the foreign manufacturer. |
|
STEP:2 |
Complete the online submission process. |
|
STEP:3 |
Arrange for sample testing at a BIS-approved laboratory. |
|
STEP:4 |
Submit the application online or offline along with the sample test report. |
|
STEP:5 |
BIS Officials review and verify the application. |
|
STEP:6 |
Grant of Licence |
Guidelines for Nominating an Authorized Indian Representative (AIR)
For those seeking BIS (Bureau of Indian Standards) certification from abroad, it's imperative to designate an Authorized Indian Representative (AIR) in the absence of a local branch office in India. The AIR plays a crucial role as the on-ground liaison overseeing the certification process and handling queries. Below are the guidelines for foreign manufacturers in appointing an Authorized Indian Representative (AIR).
|
Clause 1 |
If the foreign manufacturer maintains a liaison office or branch office in India, it will serve as the Authorized Indian Representative (AIR). |
|
Clause 2 |
In the event that the foreign manufacturer lacks a liaison office or branch office in India but the proprietor or registered user of the brand/trademark featured on the product is situated in India, said owner will assume the role of AIR. |
|
Clause 3 |
Should the manufacturer not possess a liaison office in India and there is no proprietor or registered user of the brand/trademark on the product located in India, another entity will be designated as the AIR. |
B) PROCESS FOR DOMESTIC MANUFACTURER
|
STEP:1 |
Initiate the online submission process. |
|
STEP:2 |
Conduct sample testing at a BIS-approved laboratory. |
|
STEP:3 |
Submit the application, along with the sample test report, either online or offline. |
|
STEP:4 |
The application is reviewed and verified by BIS Officials. |
|
STEP:5 |
Grant of License |
HOW THE BUREAU WORK
.jpg)
DOCUMENTS REQUIRED FOR BIS REGISTRATION OF PLASMA/LCD/LED TELEVISION IS 616:2010
-
Fully completed CDF/CCL form
-
BIS application form duly filled out
-
Manufacturing unit's business license (with English translation and local language)
-
Business license scope documentation (with English translation and local language)
-
Manufacturer's ISO certificate
-
Product marking label or marking details
-
Authorization letter (if signatory is not the manufacturing head)
-
Trade Mark Certificate
-
Trademark Authorization Letter (if trademark is owned by a party other than the manufacturer)
-
Proof of registration for the Authorized Indian Representative company in India (for foreign manufacturers)
-
ID of the Authorized Indian Representative or Authorized Signatory
-
Product technical specification sheet or user manual
|
S.No |
POINTS NEEDS TO BE CONSIDERED TO GET BIS CERTIFICATE |
|---|---|
|
1 |
Choose a BIS-recognized testing organization and an experienced compliance partner if you lack the expertise or presence in India to assist you. |
|
2 |
Ensure the selected laboratory for product testing holds a valid license and is not undergoing audits during the testing period. |
|
3 |
Before shipping samples, ensure all arrangements are in place for the entire shipment process to the testing laboratory's location. |
|
4 |
All documents must bear signatures from the manufacturer, brand owner, and Indian Representative, and additionally, they should be notarized and stamped by the brand owner and Indian representative. |
|
5 |
Accurately fill out product details in the Construction Data form (CDF) and provide concise and accurate information about product components in the Critical Component List (CCL). |
|
6 |
Test reports are valid for 3 months or 90 days; ensure timely submission to BIS Bureau of Indian Standards before expiration. Failure to do so may require retesting with new samples. |
|
7 |
Prepare all necessary documents before initiating sample testing. |
|
8 |
After submitting documents, including the test report, BIS typically takes around 15 days to approve registration. However, the approval timeline may vary, with a more realistic expectation of 30 to 60 days in some cases. |
WHY USE ABSOLUTE VERITAS (AV) FOR BIS CERTIFICATION?
If you require BIS Registration services, please contact Absolute Veritas. As a leading BIS Registration Consultant, Absolute Veritas assists manufacturers and importers in obtaining timely BIS registration for their products by offering valuable insights and assistance throughout the BIS Registration Process.
Absolute Veritas is a prominent organisation from the private sector of India primarily dealing with the Inspection, Testing, Audits, Certification of products& consulting services to various industries in India and worldwide, ensuring compliance with regulatory standards and industry requirements. Offering a comprehensive range of services including product certification, testing, training, auditing, and compliance services, Absolute Veritas helps manufacturers and importers achieve higher production efficiency and quality standards.
Absolute Veritas (AV) will handle end to end pre-registration request, sample preparation, documentation, testing and application process for BIS Certification
For any questions regarding the most recent update on BIS registration licenses, please reach out to us via email at cs@absoluteveritas.com
The Regulatory compliance vertical of Absolute Veritas also deals with following domains:
|
S.No |
DOMAIN |
|---|---|
|
1 |
Comprehensive in-house infrastructure for streamlined certification processes. |
|
2 |
Product evaluation and guidance on BIS Registration (CRS) Scheme & BIS Certification. |
|
3 |
Support in standard formulation and testing method scheme development. |
|
4 |
Analysis reports to ensure compliance with evolving standards and regulations. |
|
5 |
Advisory services for representation to ministries for NOC or product exclusions. |
|
6 |
Expert advice on new product inclusion in BIS Registration (CRS) & BIS Certification, regulatory compliance, and QCO interpretation based on draft Orders from relevant ministries. |
|
7 |
Liaison with government departments to address any company queries or clarifications. |
|
8 |
Legal compliance partnership for representing the company to various government organizations. |
|
9 |
Strategic support for business continuity and growth. |
|
10 |
Drafting emails to BIS department for clarifications on BIS regulations/QCO. |
|
11 |
Facilitation of meetings with BIS Bureau of Indian Standards and ministries for product inclusion/exclusion clarification. |
|
12 |
Regular updates on upcoming regulations and compliance requirements. |
