Tel: 0129-4001010 Phone: +91 730 321 5033
Email: cs@absoluteveritas.com
AIS Standards
AIS, or Automotive Industry Standards, represent the technical standards for the automotive sector in India, aligned with UNECE guidelines. Introduced in 1989, AIS Certification is part of the India Central Motor Vehicle Rules (CMVR). These rules govern various aspects related to vehicles, including traffic regulations, production, and maintenance, ensuring compliance and safety across the automotive industry in India.
Here is a list of the current standards for AIS mandatory products.
| AIS No. | Title |
|---|---|
| AIS-001(Part 1)(Rev. 1): 2011 | Automotive Vehicles – Approval of Devices for Indirect Vision Intended for use on M, N Category and L Category with Bodywork Vehicles – Specification |
| AIS-001(Part 2) (Rev.1): 2011 | Automotive Vehicles – Approval of Rear-View Mirrors Intended for use on L Category Vehicles without Bodywork Partly or Wholly Encloses the Driver – Specification |
| AIS-002 Amd. 1 | Automotive Vehicles – Rear – View Mirrors – Installation Requirements |
| AIS-002 (Part1) (Rev. 1): 2011 | Automotive Vehicles – Approval of Devices for Indirect Vision intended for use on L category with bodywork vehicles, M and N category – Installation requirements |
| AIS-002(Part 2) (Rev.1): 2011 | Automotive Vehicles – Approval of Rear-View Mirrors Intended for use on L Category Vehicles without Bodywork Partly or Wholly Encloses the Driver – Installation Requirements |
| AIS-003 / 1999 | Automotive Vehicles – Starting Grade ability – Method of Measurement and Requirements. (Incorporating Amend. 1 and 2) (Incorporating Amendment No. 1 / September 1999 and Amendment No. 2 / September 2000). |
| (Incorporating Amend. 1 and 2) | (Incorporating Amendment No. 1 / September 1999 and Amendment No. 2 / September 2000). |
| Amd. 3/ May 2002 | Amd. 3/ May 2002 |
| Draft AIS- 003(Rev.1/D1/ July 2007 | Automotive Vehicles – Starting Gradeability – Method of Measurement and Requirement |
| AIS-004(Part 1) / 1999 | Electromagnetic Radiation from Automotive Vehicle – Permissible Levels and Methods of Tests. |
| Amd. No.1 | Amendment No. 1 |
| Amd. No.2 | Amendment No. 1 |
| AIS-004 (Part 2) | Electromagnetic Radiated Immunity of Automotive Vehicles – Requirements & Methods of Tests |
| AIS-004(Part 3) Corrigendum 1 Amd. 1 | Automotive Vehicles – Requirements for Electromagnetic Compatibility |
| AIS-005 / 2000 | Automotive Vehicles – Safety Belt Assemblies – Specifications. Amend. 1/ May 2002 |
| AIS-006 | Automotive vehicle-Bumper Fitment on M1 Vehicles – Test Methods. |
| AIS-007 (Rev.5) Amd No. 1 Amd No. 2 Amd No. 3 Amd No. 4 Amd No. 5 | Information on Technical Specifications to be Submitted by the Vehicle Manufacturer |
| AIS-008 / 2001 Amd. No. 1 Amd. No. 2 | Installation requirements of Lighting and Light- Signalling Devices for Motor Vehicle having more than three Wheels, Trailer and Semi-Trailer excluding Agricultural Tractor and Special Purpose Vehicle |
| AIS-008(Revision 1) Amd No. 1/ August 2013 Amd No. 4 Amd No.2 Amd No. 3 | Installation Requirements of Lighting and Light-Signalling Devices for Motor Vehicle having more than Three Wheels, Trailer and Semi-Trailer excluding Agricultural Tractor and Special Purpose Vehicle |
| Draft AIS-008 (Rev.2)/D1/August 2017 | Installation Requirements of Lighting and Light – Signalling Devices for Motor Vehicle having more than Three Wheels including Quadricycles, Trailer and Semi-Trailer excluding Agricultural Tractors |
| AIS-009 / 2001 | Automotive Vehicles – Installation Requirements of Lighting and Light-Signalling Devices for 2 and 3 Wheelers, their Trailers and Semi-Trailers |
| AIS-009 (Rev.1):2011 | Automotive Vehicles – Installation Requirements of Lighting and Light-Signalling Devices for L Category Vehicles, their Trailers and Semi-Trailers |
| Draft AIS-009 (Rev.2) /D1/August 2017 | Automotive Vehicles – Installation Requirements of Lighting and Light-Signalling Devices for L Category Vehicles, their Trailers and Semi-Trailers |
| AIS-010 | Performance Requirements of Lighting and Light-Signalling Devices for 2 and 3 Wheeled Motor Vehicles, their Trailers and Semi-trailers and Vehicles treated as such |
| AIS-010 (Part 1) (Rev.1):2010 | Provisions concerning the Approval of Headlamps emitting an Asymmetrical Passing Beam or a Driving Beam or both and equipped with Filament Lamps and/or LED Modules |
| Draft AIS-010 (Part 1) (Rev. 2) /D0 / January 2018 | Provisions concerning the Approval of Headlamps emitting an asymmetrical Passing Beam or a Driving Beam or both and equipped with Filament Lamps and/or LED Modules |
| AIS-010 (Part 2) (Rev.1):2010 | Provisions concerning the Approval of Headlamps emitting a Symmetrical Passing Beam or a Driving Beam or Both and equipped with Filament Lamps or Gas-Discharge Light Sources |
| Draft AIS-010 (Rev.2) Part 2/D1 /August 2017 | Provisions of motor vehicle headlamps emitting a symmetrical passing beam or a driving beam or both and equipped with filament, gas-discharge light sources or LED Modules |
| AIS-010 (Part 3) (Rev.1):2010 | Provisions concerning the Approval of Front Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators, Rear-Registration Plate Illuminating Devices and Reversing Lamp for Vehicles of Category L and their Trailers and Semi-trailers |
| Draft AIS-010 (Rev. 2) Part 3/D1 / August 2017 | Provisions concerning the Approval of Front Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators, Rear-Registration Plate Illuminating Devices and Reversing Lamp for Vehicles of Category L and their Trailers and Semi-trailers |
| AIS-010 (Part 4) (Rev.1):2010 | Provisions concerning the Approval of Headlamps equipped with Gas Discharge Light Sources |
| AIS-010 (Part 5) (Rev.1):2010 | Requirements of Chromaticity Co-ordinates of colour of Light emitted from Lighting and Light-Signalling Devices |
| Draft AIS-010 (Part 5) (Rev.2)/D2 /Jan. 2018 | Requirements of Chromaticity Co-ordinates of colour of Light emitted from Lighting and Light-Signalling Devices |
| AIS-011 / 2001 | Automotive Vehicles – Testing Procedure for Wind Screen Wiping System for 4 wheelers other than M1 Category of Vehicles. |
| Amd. No.1 Amd.No.2 | Amendment No.1 |
| AIS-012 | Performance Requirements of Lighting and Light-Signalling Devices for Motor vehicle having more than Three-Wheels, Trailer, Semi-Trailer. |
| AIS-012 (Part 1)(Rev. 1): 2011 | Performance Requirements for Front Fog Lamps for Motor Vehicles |
| AIS-012 (Part 2)(Rev. 1):2011 | Performance Requirements for Rear Fog Lamps for Motor Vehicles |
| AIS-012 (Part 3)(Rev. 1):2011 | Performance Requirements for Cornering Lamps for Motor Vehicles |
| AIS-012 (Part 4)(Rev. 1):2011 | Performance Requirements for Rear Registration Plate (mark) Illuminating Lamp Rear Registration Plates for Motor Vehicles |
| AIS-012 (Part 5)(Rev. 1):2011 | Performance Requirements for Direction Indicators for Motor Vehicles |
| AIS-012 (Part 6)(Rev. 1):2011 | Performance Requirements for Front and Rear Position (Side) Lamps, Stop-Lamps and End-outline Marker Lamps for Motor Vehicles |
| AIS-012 (Part 7) | Performance Requirements for Reversing Lamps for Motor Vehicles |
| AIS-012 (Part 9)(Rev. 1):2011 | Performance Requirements for Side-Marker Lamps for Motor Vehicles |
| AIS-012 (Part 10)(Rev. 1):2011 | Draft Amd. 1 Performance Requirements for Daytime Running Lamps for Motor Vehicles |
| AIS-013 | Amd. 1 Automotive Vehicles – Spray Suppression Systems. |
| AIS-013 (Rev.1)/:2014 | Automotive Vehicles – Spray Suppression Systems. |
| AIS-014 / 2001 | Amd. No.1 Amd. No.2 Amd. No. 3 Automotive Vehicles – Horn Installation Requirement |
| AIS-015/ 2000 | Automotive Vehicles – Safety Belt Anchorages – Specifications |
| AIS-016 / 2000 | Automotive Vehicles – Seats, their Anchorages and Head Restraints for Category M1 – Specifications. |
| AIS-017 / 2000 | Amd. 1 Procedure for Type Approval and Certification of Vehicles for Compliance to Central Motor Vehicles Rules. |
| AIS-017 (Part 2)(Rev. 1) | Procedure for Type Approval, Certification of Agricultural Tractors for Compliance to Central Motor Vehicles Rules |
| Draft AIS-017 (Rev-1) (Part 1) /D1/December 2013 | Procedure for type approval and certification of vehicles for compliance to central motor vehicles rules |
| Draft AIS-017 (Part 2) (Rev.2)/F/ June 2016 | Procedure for Type Approval & Certification of Agricultural Tractors for Compliance to Central Motor Vehicles Rules |
| Draft AIS–017 (Part 4) (Rev.1)/D1/Aug 15 | Procedure for Conformity of Production of Agricultural Tractors for compliance to Central Motor Vehicles Rules |
| Draft AIS- 017(Part 5) (Rev.1) /D1/Aug 2015 | Criteria for Vehicle Types, Variants and Versions |
| AIS-018 / 2001 Amend. No.1/ June 2002 Draft Amd. No. 5 Amd. No. 4 Amd. No.2 Amd.No. 3 |
Automotive Vehicles – Speed Limitation Devices – Specifications. Amend. No. 1 / June 2002 Amendment No.2 |
| AIS-019 / 2001 Amd. No. 1 |
Automotive Vehicles – Wind Screen Wiping and Washing System for M1 Category of vehicles. |
| AIS-020 | Automotive vehicles – Interior Noise – Method of Measurement and Requirements |
| AIS-034 Amd. No. 1 Amd. No. 2 |
Automobile Lamps |
| AIS-034 (Part 1) (Rev.1):2010 Amd. No. 1 |
Provisions concerning the Approval of Filament Lamps for use in Approved Lamp Units on Power-driven Vehicles and their Trailers |
| AIS-034(Part 2) (Rev.1):2010 | Provisions concerning the Approval of Gas-discharge Light Sources for use in Approved Gas-discharge Lamp units of Power-driven Vehicles |
| AIS-035 Amd. No. 1 Amd. No. 2 |
Automotive Vehicles- The Arrangement of Foot Controls of Vehicles |
| AIS-037 Amd. No.1 Amd. No.2 Amd. No. 3 Amd. No. 4 Amd. No. 5 Amd. No. 6 Amd. No. 7 Amd. No. 8 |
Procedure for Type Approval and Establishing Conformity of Production for Safety Critical Components |
| AIS-038 (Rev.1):2015 | Electric Power Train Vehicles- Construction and Functional Safety Requirements |
| AIS-039 | Battery Operated Vehicles – Measurement of Electrical Energy Consumption |
| AIS-039 (Rev.1):2015 | Electric Power Train Vehicles– Measurement of Electrical Energy Consumption |
| AIS-040 | Battery Operated Vehicles – Method of Measuring the Range |
| AIS-040 (Rev.1):2015 | Electric Power Train Vehicles – Method of Measuring the Range |
| AIS-041 | Battery Operated Vehicles – Measurement of Net Power and the Max. 30 Min. Power |
| AIS-041(Rev.1):2015 | Electric Power Train Vehicles Measurement of Net Power and The Maximum 30 Minute Power |
| AIS-042 corrigendum 1 |
Agricultural Tractors – Steering Efforts Requirements. |
| AIS-043 Amd. No. 1 Amd. No. 2 Amd. No. 3 Draft Amd.4 to AIS-043 |
Recommendation of Braking System and Performance Requirements for the combination of Agricultural Tractor and Trailer |
| AIS-044 Part 1 Amd. 1 Amd. 2 |
Automotive Vehicles – Pneumatic Tyres for Commercial Vehicles. |
| AIS-044 Part 2 Amd. 1 Amd. 2 |
Automotive Vehicles – Pneumatic Tyres for Passenger Cars. |
| AIS-044 Part 3 Amd. 1 Amd. 2 |
Automotive Vehicles – Pneumatic Tyres for Two and Three-Wheeled Motor Vehicles. |
| AIS-045 Amd. 1 |
Automotive vehicles – Windscreen Wiping system for 3- wheeler vehicles and vehicles treated as such |
| AIS-046 Amd. 1 Amd. 2 |
Automotive Vehicles – Hand-Holds for Three, Four and More than Four Wheeled Motor Vehicles – Specification |
| AIS-047 Amd. No. 1 Amd. No. 2 Amd. No. 3 |
Automotive Vehicles – Interior Fittings – Specifications for other than M1 Category Vehicles |
| AIS-048 Amd. 1 |
Battery Operated Vehicles – Safety Requirements of Traction Batteries |
| AIS-049 Amd. No. 1 Amd. No.2 |
CMVR Type Approval for Battery Operated Vehicles. |
| AIS-049(Rev.1) | Electric Power Train Vehicles – CMVR Type Approval for Electric Power Train Vehicles |
| AIS- 050Amd.1 Amd.2 | Requirements for Vehicles with regard to Selection and Approval for use of Tyres for Two and Three- Wheelers |
| AIS-051Amd. 1 Amd.2 | Requirements for Vehicles with regard to Selection and Approval or use of Tyres for other than Two and Three-Wheelers. |
| AIS-052 (Rev 1) (amalgamating Amendments 1to 8) Corrigendum1 |
Code of Practice for Bus Body Design and Approval |
| AIS-053 Amd. No. 1 Amd. No. 2 Amd. No. 3 Amd. No. 4 Amd No.5 Corrigendum 1 |
Automotive Vehicles – Types – Terminology |
| AIS-055 | Automotive CNG / LPG Vehicles – Test Method to Evaluate the Range. |
| AIS-056 | Automotive Vehicles – Methods of Enhancing Comfort in Rider Cabin |
| AIS-056(Rev.1) | Requirements of Truck Cabin Ventilation System for Category N2 & N3 Vehicles |
| AIS-057 Amd. No. 1 |
Performance Requirements for Retro-Reflecting Devices for Power-Driven Vehicles and their Trailers |
| AIS-057 (Rev.1):2010 | Provisions concerning the Approval of Retro-Reflecting Devices for Power Driven Vehicles and their Trailers |
| Draft AIS-057 (Rev.1)/D1/August 2017 | Performance Requirements for Retro-Reflecting Devices for Motor Vehicles and their Trailers |
| AIS-058(Part1) Amd. No. 1 | Protective Helmets for Motor Cycle Riders. |
| AIS-058 (Part 2) | Visors of Protective Helmets for Motorcycle Riders – Specification |
| AIS-059 | Automotive Vehicles – Recording Equipment in Road Vehicles (Tachograph) |
| AIS-060 | General Guidelines on Control Cables for Automobiles |
| AIS-061 | Guideline Specifications for Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven Vehicles and their Trailers |
| AIS-062 Amd. No. 1 |
Performance requirements for Lighting and Light- Signalling Devices for Agricultural Tractors. |
| AIS 062 (Rev.1) | Performance requirements for Lighting and Light-Signalling Devices for Agricultural Tractors. |
| AIS-063 (amalgamating Amendments 1 to 9) |
Requirements for School Buses |
| AIS-064 (Part 1) | Automotive Vehicles- Retreaded Pneumatic Tyres for Commercial Vehicles |
| AIS-064 (Part 2) | Automotive Vehicles- Retreaded Pneumatic Tyres for Passenger Car |
| AIS-065 Amd. No. 1 Amd. No. 2 Amd. No. 3 |
Statutory Plates and Inscriptions for Motor Vehicles, their Location and Method of attachment – Vehicle Identification Numbering System. |
| AIS-066 | Guidelines for Analysis of Automotive Rubbers by Fourier Transform Infra-red Spectrometry (FTIR) and Thermo gravimetry (TGA) Techniques |
| AIS-068 Amd. No. 1 |
Requirements for Windows fitted on Buses |
| AIS-069 | Approval of: I. Front Underrun Protective Devices (FUPDs) II. Vehicles with regard to the installation of FUPD of an Approved Type III. Vehicles with regard to the installation of FUPD of an Approved Type |
| AIS-070 Amd. No.1 |
Requirements of Temporary Cabin for Drive- Away-Chassis Configuration / Vehicles |
| AIS-071 (Part 1) Amd. 1 Draft Amd. 2 |
Automotive Vehicles – Identification of Controls Tell-Tales and Indicators |
| AIS-071 (Part 2) Amd. 1 |
Automotive Vehicles – Control Location and Operation Requirements |
| AIS- 072 Amd. 1 Amd. 2 |
Approval of Restraining Devices for Child Occupants of Power- Driven Vehicles(“Child Restraint System”) |
| AIS-073(Part 1) Amd. No. 1 |
Automotive Vehicles – Wheel Rims for Two and Three Wheeled Vehicles – Light Alloy Wheel Rims – Method of Test and Requirements |
| AIS-073(Part 2) Amd. No. 1 |
Automotive Vehicles – Wheel Rims for Two and Three Wheeled Vehicles – Sheet Metal Wheel Rims – Method of Test and Requirements |
| AIS-073(Part 3) Amd. 1 Amd. 2 |
Automotive Vehicles –Wheel Rims for Two and Three Wheeled Vehicles –Spoke Wheel Rims – Method of test and Requirements |
| AIS-074 Amd. 1 |
Approval of Vehicles with regard to their Protection against Unauthorized use –Two and Three Wheeled Vehicles |
| AIS-075 Amd. 1 Amd. 2 |
Approval of Vehicles with regard to their Protection against Unauthorized use – Four Wheeled Vehicles |
| AIS-076 Amd. 1 Amd. 2 |
Approval of Vehicle Alarm Systems (VAS) for M1 and N1 Category of Vehicles and of these Vehicles with regard to their Alarm Systems (AS) |
| AIS-077 | Specification for Automotive Timing Belts |
| AIS-078 | Specification for Automotive V Belts |
| AIS-079 | Procedure for Performance Evaluation on Rubber to Metal Bonded Components |
| AIS-080 | Procedure for Evaluation of Rubber Bushing Components |
| AIS-081 | Classification and Test Requirements for Automotive Rubber Gaskets |
| AIS-082 | Requirements for IC Engine Coolant Hoses |
| AIS-083 | Headlamp Cleaners and their Fitment on Power Driven Vehicles with regard to Headlamp Cleaners |
| AIS-084 (Part1) Amd. No. 1 Amd No. 2/ August 2013 |
Automotive Vehicles – Performance requirements of Demisting Systems of Glazed Surfaces (Wind Screen) of Motor Vehicles |
| AIS-084 (Part 2) Amd. No. 1 Amd No. 2/ August 2013 |
Automotive Vehicles – Performance requirements of Defrosting Systems of Glazed Surfaces (Wind Screen) of Motor Vehicles |
| AIS-085 | Automotive Vehicles-Weather Strips- Specification |
| AIS-086 | Specification for Oil Seals and ‘O’ Rings for Automotive Application |
| AIS-087 | Guidelines for analysis of Elastomeric Sound Deadner (Under seal) Silencer |
| AIS-088 | Performance requirements of Rear Marking Plates (Rear Warning Triangles) for Slow Moving Vehicles (By Construction), Agricultural Tractors, their Trailers and Semi-Trailers |
| AIS-089 Amd. 1 |
Approval of Rear Marking Plates for Heavy and Long Vehicles |
| AIS-090 | Approval of Retro-Reflective Markings for Heavy and Long Vehicles, their Trailers and Semi-trailers |
| AIS-091 (Part 1) | Automotives Vehicles- Mechanical Coupling Components of Combinations of Vehicles other than Agricultural Tractors – Requirements |
| AIS-091 (Part 2) | Requirements of Mechanical Couplings between Agricultural Tractor and Towed Vehicle and Vertical Load on the Coupling Point |
| Draft AIS-091 (Part 3) /D7/22nd Nov. 2017 | Interchangeability dimensions for ensuring safe coupling between N3 category Haulage Tractors and T3 & T4 category Semi-Trailers |
| AIS-092 | Approval of: I. A Close-Coupling Device (CCD) II. Vehicles with Regard to the fitting of an Approved Type of CCD |
| AIS-093 | Code of Practice for Construction and Approval of Truck Cabs, Truck Bodies and Trailers |
| AIS-093 (Rev.1): 2015 Amd. No. 1 Amd. No.2 |
Code of Practice for Construction and Approval of Truck Cabs & Truck Bodies |
| AIS-095 Amd 1 16 May 2014 |
Requirements for Metallic Fuel Tanks of Automotive Vehicles |
| AIS-096 Amd No. 1 Amd No. 2 Amd No. 3 Amd No. 4 |
Requirements for Behavior of Steering Mechanism of a Vehicle in a Head-on Collision |
| AIS-097 | Procedure for determining the “H” Point and the Torso Angle for 50th percentile Adult Male in seating positions of Motor Vehicles. |
| AIS-098 Amd No. 1 Amd. No.2 |
Requirements for the Protection of the Occupants in the event of an Offset Frontal Collision |
| AIS-099 Amd No. 1 Amd. No.2 |
Approval of Vehicles with regards to the Protection of the Occupants in the event of a Lateral Collision |
| AIS-100 Amd. No. 1 Amd. No. 2 |
Requirements for the Protection of Pedestrian & other Vulnerable Road Users in the event of a Collision with a Motor Vehicle |
| AIS-101 Amd. No.1 |
Requirements for the Protection of Fuel System in the Event of Rear Impact of a Motor Vehicle |
| AIS-102 (Part 1) Amd. No.1 Amd. No.2 |
CMVR Type Approval for Hybrid Electric Vehicles |
| AIS-102 (Part 2) | CMVR Type Approval for Hybrid Electric Vehicles of M and N Category with GVW > 3500 kg |
| AIS-103 | Automotive Vehicles – Spray-Suppression Systems for Two Wheeled Motor Vehicles |
| AIS-104 Amd. No.1 |
Technical Requirements of Fuel Tanks for Agricultural Tractors |
| AIS-105 | Requirements of Ballast Mass for Agricultural Tractors |
| AIS-106 | Requirements of Load Platforms of Agricultural Tractors |
| AIS-107 | Requirements of Driver’s Field of Vision for Agricultural Tractors |
| Finalised Draft AIS-108/F/ Nov. 2007 | Agricultural Tractors -Rear Mounted Power Take Off Types 1,2 and 3 |
| AIS-109 | Requirements of Coupling Device (Front) of Agricultural Tractor |
| AIS-110 Amd. 1 Draft Amd.2 |
Automotive Vehicles Temporary-Use Spare Wheel / Tyres and Run Flat Tyres |
| AIS-111 | Requirements of Attendant’s Seats of Agricultural Tractors |
| AIS-112 | Code of Practice for Construction & Approval of Agricultural Trailers |
| AIS-113 Amd. No. 1 Amd. No. 2 Amd. No. 3 Amd. No. 4 |
Code of Practice for Type Approval of Trailers / Semi-trailers of categories T2, T3 and T4 being towed by Motor Vehicles of categories N2 and N3 |
| AIS-114 | Agricultural Tractors – Rear View Mirrors – Installation Requirements |
| AIS-115(Part 1) | Driver – Perceived Noise Level of Agricultural Tractors – Method of Measurement |
| AIS-115(Part 2) | Permissible Sound Level at Bystander of Agricultural Tractors – Method of Measurement |
| AIS-116 | Maximum Design Speed of Agricultural Tractors |
| AIS-117 | Statutory Plates and Inscriptions for Agricultural Tractors, their Location and Method of Attachment – Agricultural Tractor Identification Numbering System |
| Draft AIS-118/D3/April 2011 | Automotive Vehicles – Safety Glazing Materials for Motor Vehicles – Method of Test and Requirements |
| AIS-119 | Requirements for Sleeper Coaches |
| AIS-119 (Rev.1) Amd. 1 |
Specific Constructional Requirements for Sleeper Coaches |
| AIS-120 Amd. 1 |
Automotive Vehicles-External Projections- Performance Requirements for M1 Vehicles |
| Draft AIS-121/D1/June 12, 2012 | Requirements of Driver’s Seat for Wheeled Agricultural or Forestry Tractors |
| Draft AIS-122/ D1/June 12, 2012 | Requirement of Operating Space, Access to the Driving Position and the Doors, and Windows of Wheeled Agricultural or Forestry Tractors |
| AIS-123 Amd. No. 1 Amd 1 to AIS 123(Part 1) |
CMVR Type Approval of Vehicles Retrofitted with Hybrid Electric System |
| AIS-123(Part 2) | CMVR Type Approval of Hybrid Electric System Intended for Retro-fitment on Vehicles of M and N Category having GVW > 3500 kg |
| AIS-123(Part 3) | CMVR Type Approval of Electric Propulsion Kit Intended for Conversion of Vehicles for Pure Electric Operation |
| AIS-124 | Procedure for Type Approval and Certification of Motor Caravans for compliance to Central Motor Vehicles Rules |
| AIS-125(Part 1) Amendment 1 Amd. No 2 |
Constructional and Functional Requirements for Road Ambulances |
| AIS-125(Part 2) | Medical Equipment for Road Ambulances |
| AIS-126 Amd. 1 |
Two Wheeled Vehicles – Location, Identification and operation of Controls, Tell-tales and Indicators. |
| AIS-127 | Provisions Concerning the Approval of Adaptive Front- Lighting Systems (AFS) for Motor Vehicles |
| AIS-128 Amd. No. 1 |
Testing Procedure and Requirements for Headlamp Beam Testing and Brake Testing at Authorized Testing Stations using Headlight Tester and Roller Brake Tester |
| AIS-129 | End of Life of Vehicles |
| AIS-130 Amd. 1 |
Provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers |
| AIS-131 | Type Approval Procedure for Electric and Hybrid Electric Vehicles introduced in market for Pilot / Demonstration Projects intended for Government Scheme |
| Draft AIS-132/D10/May 2017 | Procedure for Approval of Vehicles produced or imported in Small Series, and Vehicles produced or imported under Pilot/Demonstration Projects |
| AIS-133 | Electronic Stability Control Systems |
| AIS-134 Amd. No. 1 |
Safety measures for Occupants of Three Wheeled Vehicles |
| AIS-135 | Fire Detection and Alarm System (FDAS) & Fire Detection and Suppression Systems (FDSS) for Buses of Type III (AIS-052)-Requirements |
| AIS-136 Amd. No.1 |
Construction Equipment Vehicles or Earth-moving Vehicles / Machinery- Product Identification Numbering system |
| Draft AIS-137 (Part 1)/D2/July2017 | Document on Test Method, Testing Equipment and Related Procedures for Testing Type Approval and Conformity of Production (COP) of Vehicles for Emission as per CMV Rules 115, 116 and 126 PART 1 (2-wheeler) |
| Draft AIS-137 (Part 2)/D1/July2017 | Document on Test Method, Testing Equipment and Related Procedures for Testing Type Approval and Conformity of Production (COP) of Vehicles for Emission as per CMV Rules 115, 116 and 126 PART 2 (3-wheeler) |
| Draft AIS-137 (Part 3) /D3/July 2017 | Document on Test Method, Testing Equipment and Related Procedures for Testing Type Approval and Conformity of Production (Cop) of Vehicles for Emission as per CMV Rules 115, 116 And 126 PART-3 BSVI Emission norms |
| Draft AIS-137 (Part 4)/D1/ May 2017 | Document on Test Method, Testing Equipment and Related Procedures for Testing Type Approval and Conformity of Production (COP) of Vehicles for Emission as per CMV Rules 115, 116 and 126 PART-4 BSVI EMISSION NORMS |
| Draft AIS-137 (Part 5)/D2/ July 2017 | Document on Test Method, Testing Equipment and Related Procedures for Testing Type Approval and Conformity of Production (COP) of Vehicles for Emission as per CMV Rules 115, 116 and 126 |
| Draft AIS-137 (Part 6)/D2/July2017 | Document on Administrative Procedure for Type Approval and Conformity of Production for M and N Category Vehicles, Two and Three Wheelers and CEV/Tractors/Power tiller engines. As per CMV Rules 115, 116 And 126 PART-6 BSVI EMISSION NORMS |
| Draft AIS-137 (Part 8)/ D0/May 2017 | Document on Test Method, Testing Equipment and Related Procedures for 4 Gas Analyzer & Diesel Smoke Meter: Testing Type Approval and Conformity of Production (COP) of PUC Equipment as per CMV Rules 115, 116: PART 8 (4 Gas Analyzer & Diesel Smoke Meter) |
| AIS-138 (Part1) | Electric Vehicle Conductive AC Charging System |
| AIS-138(Part 2) | Electric vehicle conductive DC charging system |
| AIS-139 | Specific Requirements for Double Deck Buses |
| AIS-140 | Intelligent Transportation Systems (ITS) – Requirements for Public Transport Vehicle Operation |
| AIS-142/D2/Novem ber 2017 | Evaluation of Tyres With Regard to Rolling Sound Emissions and/or to Adhesion on Wet Surfaces and/or to Rolling Resistance |
| AIS-143 | Performance Requirements and Test Procedures of Braking Systems for Wheeled High-Speed Rubber Tracked Earth Moving Machines and all types of Construction Equipment Vehicles |
| AIS-144 | Performance Earth Moving Machinery-Rubber Tyred Machines-Steering Requirements |
| Draft AIS-145/DF1/5th Oct 2017 | Additional Safety features for Category M & N Vehicles |
| Draft AIS- 146/D0 Aug.2017 | Requirements applying to stands fitted in two wheeled motor vehicles |
| Draft AIS- 147/D0 Aug.2017 | External Projection requirements for Two Wheeled Motor Vehicles |
| Draft AIS-148/ D1/Jan 2018 | Automotive Vehicles – Requirements of Footrests for Two-wheeled Motor Vehicles |
| Draft AIS-149 | Conformity of Production (CoP) Procedure for verifying compliance to Fuel Efficiency Norms for Heavy Duty Diesel Vehicles above 12.0 tonnes GVW |
| Draft AIS-150 | Automotive Vehicles – Uniform Provisions Concerning the Approval of Vehicles of Categories M2, M3, N and T with regard to braking |
| Draft AIS-151 | Automotive Vehicles – Uniform Provisions Concerning the Approval of Vehicles of Categories M1 and N1 with regard to braking |
| Draft AIS-152 | Automotive Vehicles – Uniform Provisions Concerning the Approval of Vehicles of Categories M1, and N1 with regard to brake assist system |
| Draft AIS-153 | Uniform provisions for Bus construction (Based on UN Regulation 107) |
