Absolute Veritas continues to strengthen its position as a trusted global partner for BIS Certification and ISI Mark certification for foreign manufacturers, supporting compliance with regulations issued by the Bureau of Indian Standards (BIS) ,the National Standards Body of India responsible for formulating Indian Standards, implementing Quality Control Orders (QCOs), and granting ISI Mark certification.

With an active presence as a BIS Certification consultant in Germany and across Europe, Absolute Veritas recently supported and coordinated a BIS Foreign Manufacturer Certification (FMCS) audit in Germany under IS 302-1:2024 – Safety of Household, Commercial and Similar Electrical Appliances, with Dishwashers audited as a representative product category.

Beyond the successful audit execution, the engagement also enabled valuable learning and technical discussions with senior officials of the Bureau of Indian Standards. Direct interaction with Mr. Manish Kumar provided deeper insights into BIS audit expectations, interpretation of IS 302 (Part 1): 2024 IEC 60335-1: 2020 , and evolving regulatory priorities under the BIS Quality Control Order (QCO) framework, further strengthening Absolute Veritas’ ability to guide foreign manufacturers with regulator aligned and practical compliance strategies.

BIS FMCS Audit for Household, Commercial and Similar Electrical Appliances in Germany

The scope of IS 302 (Part 1): 2024 IEC 60335-1: 2020 , issued by the Bureau of Indian Standards, covers a wide range of household, commercial and similar electrical appliances intended for the Indian market. As per the latest notification issued under the BIS Quality Control Order (QCO) , the regulation will be implemented from 19 March 2026 .

Manufacturers and importers are therefore advised to initiate the BIS Certification ISI Mark process well in advance to ensure seamless compliance before enforcement by BIS.
During this audit:

• Dishwashers were evaluated as part of the broader appliance category .

• The overseas manufacturing facility was audited directly by officials of the Bureau of Indian Standards under the Foreign Manufacturer Certification Scheme (FMCS).

• Compliance with Indian Standards, BIS-approved factory quality systems, and testing controls was comprehensively assessed.

Key highlights of the audit:

• Product audited: Dishwasher (under IS 302-1 appliance category)

• Applicable Indian Standard: IS 302 (Part 1): 2024 IEC 60335-1: 2020 (issued by BIS)

• Certification Scheme: BIS FMCS (Foreign Manufacturer Certification Scheme)

• Audit location: Germany

• Conducted by: FMCD, Bureau of Indian Standards (BIS)

• Industry segment: Household, Commercial & Similar Electrical Appliances

Although similar IS 302 (Part 1): 2024 IEC 60335-1: 2020 audits have been conducted by the Bureau of Indian Standards in recent months, this audit represents another important milestone in Absolute Veritas’ continued involvement in BIS FMCS audits for household and commercial electrical appliances, showcasing our consistent capability in supporting foreign manufacturers through complex regulatory requirements prescribed by BIS.

Key Takeaways from BIS FMCS Audit

The BIS FMCS audit provided several important regulatory and technical insights for foreign manufacturers operating in Germany, Italy, Switzerland, and across Europe:

• Early preparedness is essential: With the BIS QCO implementation date set for 19 March 2026, manufacturers should begin certification planning well in advance.

• IS 302 (Part 1): 2024 IEC 60335-1: 2020 interpretation is product-specific:BIS places strong emphasis on correct clause applicability based on product design, construction, and intended use.

• Factory quality systems are closely examined by BIS: Process control, traceability, production consistency, and in-house testing infrastructure are key focus areas.

• Accuracy of BIS documentation is critical:Product manuals, risk assessments, drawings, and test records must be current, accurate, and aligned with BIS Indian Standards.

• European manufacturers must address India-specific BIS requirements:Compliance with EN/IEC standards alone is not sufficient; BIS-specific requirements under QCOs are mandatory.

❮ ❯

Our team ensured a seamless experience by:

• Coordinating closely with BIS officials to manage every stage of the foreign audit procedure in full compliance with Indian regulatory standards.

• Preparing, verifying, and organizing detailed technical documentation, including product grouping, test reports, and factory quality manuals, as per BIS FMCS guidelines.

• Conducting pre-audit readiness assessments and mock inspections to identify gaps and strengthen compliance before the official audit.

• Providing on-site technical assistance and guidance to the factory team during the BIS inspection, ensuring smooth verification and adherence to all required Indian Standards (IS).

Importance of ISI Mark Certification under the Bureau of Indian Standards

For overseas manufacturers, ISI Mark certification, granted by the Bureau of Indian Standards, is mandatory for regulated products intended for the Indian market.
Under the Foreign Manufacturer Certification India (FMCS) framework administered by BIS:

• Manufacturing facilities outside India are audited directly by BIS officials

• Products must fully comply with applicable Indian Standards issued by BIS

• Factory testing facilities, quality control systems, and production consistency are verified

• Product samples are tested in BIS-recognized laboratories in India

Non-compliance with BIS regulations may lead to import restrictions, customs clearance delays, and legal penalties, making it essential for manufacturers to engage experienced ISI Mark consultants and BIS Certification consultants.

Absolute Veritas : BIS Certification Consultant in Germany, Europe & Beyond

Absolute Veritas is a globally recognised BIS Certification consultant in Germany and Europe, supporting manufacturers across Italy, Switzerland, Austria, China, Vietnam, Sri Lanka, and other global manufacturing hubs in complying with requirements of the Bureau of Indian Standards.

As experienced ISI Mark consultants and BIS Certification consultants for foreign manufacturers, our expertise includes:

• ISI Mark Certification issued by BIS

• BIS Certification for Foreign Manufacturers

• BIS Certification ISI Mark under QCO framework

• Foreign Manufacturer Certification Scheme (FMCS)

Also Read: BIS Certification Consulting Services by Absolute Veritas

Our Commitment to Global Compliance Excellence

This successful BIS FMCS audit in Germany further reinforces Absolute Veritas’ role as a reliable and experienced BIS Certification consultant for foreign manufacturers, working closely with the Bureau of Indian Standards to ensure smooth, compliant, and regulator-aligned certification journeys.

About Absolute Veritas

Absolute Veritas is a leading global provider of compliance, testing, inspection, and certification (TIC) services, with over 15 years of expertise in ensuring product quality, safety, and regulatory adherence across diverse industries. Headquartered in New Delhi, India, the company offers end-to-end solutions for manufacturers, exporters, and importers, covering a wide range of products including electronics, toys, batteries, medical devices, automobiles, audio-video equipment, lighting, and furniture.

With a strong presence across India and twelve Asian countries, Absolute Veritas specializes in BIS certification, Quality Control, and regulatory compliance audits, providing seamless coordination with laboratories, auditors, and government officials. Our team of industry experts, comprising veterans from both private and public sectors, ensures accurate, on-site inspections and audits, tailored to each client’s requirements.

Explore the full range of certification services offered by Absolute Veritas

Contact us today for expert guidance on BIS certification, Authorized Indian Representation (AIR), FMCS compliance, and comprehensive regulatory support to ensure your products meet India’s stringent standards and gain seamless market access.

For more information please contact us at cs@absoluteveritas.com

Frequently asked questions (FAQ)