Tel: 0129-4001010 Phone: +91 730 321 5033
Email: cs@absoluteveritas.com

The Bureau of Indian Standards (BIS) has released new implementation guidelines for IS 16102 (Part 1): 2026, the revised safety standard for LED lamps in India. This update replaces the earlier IS 16102 (Part 1): 2012 standard and introduces additional testing, safety, and marking requirements aimed at improving the quality and safety of LED lighting products available in the Indian market.
According to the official notification, BIS has allowed a transition period where both the old and revised standards will run concurrently. However, this transition will only remain valid until 2 August 2026 . After this deadline, the previous 2012 version of the standard will be withdrawn , and manufacturers will be required to ensure full compliance with IS 16102 (Part 1): 2026 to maintain or obtain BIS certification.
These BIS LED lamp guidelines 2026 are particularly important for manufacturers, importers, and businesses involved in the lighting industry, as they directly impact BIS LED lamp certification in India. Companies holding existing licenses must update their products and submit revised test reports to demonstrate compliance with the BIS revised LED lamp standard, while new applicants must ensure their products meet the updated requirements under IS 16102 Part 1: 2026 .
The IS 16102 (Part 1) LED lamp standard is a key regulation that defines the safety, performance, and quality requirements for LED lamps in India. This standard is developed and issued by the Bureau of Indian Standards (BIS) to ensure that LED lighting products sold in the Indian market meet required safety and performance benchmarks.
The IS 16102 LED lamp standard forms an important part of the BIS LED bulb standard in India, under which manufacturers and importers must obtain BIS certification before selling LED lamps in the country. By complying with this standard, companies ensure that their products are safe, reliable, and suitable for everyday lighting applications.
Scope of the Standard : The IS 16102 LED lamp standard mainly applies to self-ballasted LED lamps used for general lighting purposes. The standard covers important technical aspects such as product design, construction, performance, and testing requirements. It also specifies how LED lamps should be tested in recognized laboratories to ensure compliance with the BIS LED bulb standard in India.
Safety and Performance Requirements : The LED lamp safety standard BIS includes several important requirements related to electrical safety, durability, performance testing, and product marking. These requirements ensure that LED lamps operate safely and perform efficiently during regular use.
BIS Regulates LED Lamps as : The Bureau of Indian Standards regulates LED lamps to maintain product safety, quality, and reliability in the market. With the increasing use of LED lighting, it is important to ensure that these products meet uniform safety standards.
For manufacturers, the Grant of Licence BIS is not just a certificate it is a legal authorization linked to a specific manufacturing location and product standard. The licence is granted only after successful document review, BIS factory inspection, and product sample testing.
For importers, (where applicable under relevant schemes), obtaining the required BIS approval is essential before placing regulated products in the Indian market.
The Bureau of Indian Standards (BIS) has issued new implementation guidelines for IS 16102 (Part 1): 2026 to ensure that LED lamps in India meet updated safety and performance standards. These BIS implementation guidelines 2026 help manufacturers, importers, and license holders understand the transition process and the compliance requirements under the BIS certification update 2026.
Below are the key points explaining the purpose and requirements of the guidelines:
| Change Area | Explanation |
| Minimum Marking Fee Revision of the Previous Standard | BIS has revised the earlier IS 16102 (Part 1): 2012 standard and introduced IS 16102 (Part 1): 2026. |
| Introduction of Updated Safety Requirements | The revised standard introduces additional tests and technical requirements to strengthen the LED lamp safety framework in India, ensuring better product quality and consumer protection. |
| Transition Period for Implementation | BIS has provided a concurrent running period during which both the old and revised standards will remain valid. This transition period allows manufacturers to gradually update their products and certification processes. |
| Deadline for Compliance | The last date for implementing the revised standard is 2 August 2026. After this date, the 2012 version of the standard will be withdrawn, and only the revised IS 16102 (Part 1): 2026 will be applicable. |
| Compliance Requirements for Manufacturers | Under the updated BIS LED compliance rules, manufacturers and license holders must ensure that their LED lamps meet the new safety, testing, and marking requirements defined in the revised standard. |
The Bureau of Indian Standards (BIS) has issued specific guidelines for existing license holders manufacturing LED lamps under the revised IS 16102 (Part 1): 2026 standard. These guidelines are part of the BIS certification update 2026 and ensure that companies upgrade their products to meet the latest BIS LED compliance rules within the given timeline.
Below are the key responsibilities for companies holding an existing BIS license:
1. Implementation Requirement
All existing license holders must implement the revised IS 16102 (Part 1): 2026 standard by 2 August 2026. After this deadline, only the revised standard will be valid.
Companies must update their products and certification to maintain BIS license compliance for LED lamps.
2. Submission of Test Reports
Manufacturers must submit complete test reports from BIS-recognized laboratories confirming that the lead model covered under the license complies with the revised IS 16102 LED lamp standard
3. Undertaking for Series Models
License holders must provide an undertaking to BIS confirming that all series models under the license scope comply with IS 16102 (Part 1): 2026.
4. Consequences of Non-Compliance
If the license holder fails to implement the revised standard before the deadline, BIS may take action under BIS license cancellation rules.
This may include cancellation of the license or deletion of specific models from the license scope.
The Bureau of Indian Standards (BIS) has provided a transition period to help manufacturers shift from the previous LED lamp standard to the revised one. During this concurrent running BIS standard period, both IS 16102 (Part 1): 2012 and IS 16102 (Part 1): 2026 will remain valid . However, companies must ensure compliance with the revised standard before the final deadline to maintain BIS certification for LED lamps.
| Key Aspect | Details |
| Start of Revised Standard | The revised IS 16102 (Part 1): 2026 has been officially published by BIS and the implementation guidelines have come into force with immediate effect. |
| BIS Transition Period for LED Standard | BIS has allowed a concurrent running period where both the old and revised standards can be followed for certification and compliance. |
| BIS Compliance Deadline for LED Lamps | The last date to implement the revised standard is 2 August 2026. All manufacturers must ensure compliance with IS 16102 (Part 1): 2026 before this date. |
| Withdrawal of Old Standard | After 2 August 2026, the earlier IS 16102 (Part 1): 2012 standard will be withdrawn, and only the revised IS 16102 (Part 1): 2026 will remain applicable for BIS certification. |
The Bureau of Indian Standards (BIS) has also defined specific rules for new applicants seeking BIS certification for LED lamps under the revised IS 16102 (Part 1): 2026 standard. These guidelines clarify how new manufacturers should proceed with the BIS LED lamp certification process during the transition period.
Applications Under Old vs Revised Standard : New applicants may apply for certification under either the old standard (IS 16102 Part 1: 2012) or the revised standard (IS 16102 Part 1: 2026) during the transition period. Applications where samples have already been submitted to the laboratory or test reports have been issued may continue to be processed under the old standard.
Declaration Requirement : If a manufacturer applies under the 2012 standard, they must provide a declaration confirming that they will implement the revised IS 16102 (Part 1): 2026 standard before the final implementation deadline. This declaration ensures future compliance with the updated BIS certification for LED manufacturers.
Deadline for Applying Under the Old Standard : Manufacturers can submit applications under the old standard only until 2 August 2026. After this deadline, all BIS applications for LED lamps must comply with the revised IS 16102 (Part 1): 2026 standard as part of the updated BIS application process for LED lamps.
The Bureau of Indian Standards (BIS) has also issued rules for companies requesting a change in scope of licence under IS 16102 (Part 1): 2026 . These guidelines apply when manufacturers want to add new LED lamp models or modify the existing product scope under their BIS license.
Adding New Models : When manufacturers apply for BIS LED product model approval to add new LED lamp models, the request will be processed according to the same rules applicable to new applicants under the BIS LED lamp certification process.
Modification of Product Scope : Any request related to BIS change in scope licence must comply with the relevant requirements of the applicable standard.
Deadline for Old Standard Applications : Requests for change in scope under the old standard (IS 16102 Part 1: 2012) will be allowed only until the licensee switches to the revised standard or until 2 August 2026, whichever is earlier.
Manufacturers must take timely action to comply with the revised IS 16102 (Part 1): 2026 standard before the 2 August 2026 deadline. Following the correct BIS certification steps for LED lamps will help companies maintain their license and ensure smooth compliance with the updated requirements issued by the Bureau of Indian Standards.
The table below outlines the key steps on how to comply with the BIS LED standard before the implementation deadline.
| Step | Action Required |
| Review the Revised Standard | Carefully study the requirements of IS 16102 (Part 1): 2026 and identify the new safety, testing, and marking requirements. |
| Conduct Product Testing | Get the lead model tested at a BIS-recognized laboratory according to the revised standard. |
| Update Product Documentation | Revise technical documents, product specifications, and compliance records based on the updated standard. |
| Submit Test Reports to BIS | Submit the complete test reports for the lead model to BIS for verification and compliance approval. |
| Ensure Marking and Compliance Declaration | Confirm that all series models follow the revised standard and provide the required undertaking to BIS. |
With the introduction of IS 16102 (Part 1): 2026, manufacturers and importers of LED lamps must ensure timely compliance with the updated requirements issued by the Bureau of Indian Standards. The transition from the 2012 standard to the revised framework involves product testing, documentation updates, and submission of test reports, making it essential for businesses to carefully follow the BIS compliance process before the 2 August 2026 deadline.
Navigating the BIS LED lamp certification process and meeting the updated LED compliance requirements can be complex for manufacturers, especially when it comes to testing procedures, documentation, and regulatory approvals under the BIS CRS (Compulsory Registration Scheme).
Absolute Veritas offers expert support to help businesses achieve smooth and timely BIS CRS compliance for LED lamps. Their team assists manufacturers and importers throughout the certification process, including:
Guidance on BIS LED lamp compliance requirements under IS 16102 (Part 1): 2026
Assistance with BIS CRS registration for LED products
Coordination with BIS-recognized laboratories for product testing
Preparation and submission of technical documents and test reports
Support for BIS license applications, scope changes, and compliance updates
With professional regulatory expertise, Absolute Veritas helps businesses simplify the BIS certification process for LED lamps, reduce delays, and ensure full compliance with the latest BIS regulations. This allows manufacturers to focus on their operations while ensuring their LED products remain certified, compliant, and ready for the Indian market.
Connect with us now to get expert consultation and seamless CRS Certification support across India. For more information please contact us at cs@absoluteveritas.com
The last date for implementing the revised standard is 2 August 2026. After this date, the earlier IS 16102 (Part 1): 2012 standard will be withdrawn.
Yes, applications can still be processed under the 2012 standard during the transition period. However, manufacturers must declare that they will shift to the revised standard before the final deadline.
If a license holder fails to comply with IS 16102 (Part 1): 2026 before the deadline, BIS may initiate cancellation of the license or remove the product model from the license scope.
Yes, LED lamps are covered under the BIS Compulsory Registration Scheme (CRS). Manufacturers must obtain BIS registration before selling LED lamps in the Indian market.
Yes, existing BIS license holders must submit updated test reports for the lead model to demonstrate compliance with the revised standard.