BIS Introduces New Lighting Standards in 2026 – What Manufacturers & Importers Must Know

Table of Content

crs

India’s lighting industry has received an important regulatory update with the latest notification issued by the Bureau of Indian Standards (BIS). The authority has introduced revised Indian Standards for lighting products, covering various categories such as luminaires, LED lamps, and linear LED lighting systems. These updates replace earlier versions of the standards and introduce enhanced safety, testing, and performance requirements aligned with evolving international benchmarks and modern lighting technologies.

The revised standards apply to a wide range of stakeholders, including lighting manufacturers, LED lamp producers, importers of lighting products, and existing BIS licence holders operating in the Indian market. Businesses dealing with lighting equipment must review these updates carefully to ensure continued regulatory compliance.

As per the notification, the new standards came into effect on 2 February 2026, while the previous versions will remain valid until 2 August 2026 , providing a transition period for manufacturers and importers to align their products and certification with the updated requirements.

From a compliance perspective, this update is particularly significant for companies dealing with products covered under standards such as IS 10322 (Luminaires), IS 16102 (Self-Ballasted LED Lamps), and IS 16614 (Double-Capped LED Linear Lamps). Businesses must ensure that their products comply with the latest BIS lighting standards 2026 before the withdrawal of the older standards.

Important Updates in the BIS Lighting Standards Notification

To strengthen product safety and align Indian regulations with evolving technology, the Bureau of Indian Standards (BIS) has issued a notification introducing new and revised standards for lighting products in India. The key points of this notification are explained below:

Official Notification Issued: BIS released the notification on 3 February 2026, announcing the establishment and revision of multiple Indian Standards related to lighting products.
Revision of Major Lighting Standards: Several important standards covering luminaires, LED lamps, floodlights, portable lighting, emergency lighting, and lighting chains have been revised to improve safety, performance, and testing requirements.
Introduction of Updated Standards: New versions of standards such as IS 10322 (Luminaires), IS 16102 (Self-Ballasted LED Lamps), and IS 16614 (Double-Capped LED Linear Lamps) have been established with updated technical specifications.
Alignment with International Standards: Many of the updated standards are aligned with international IEC lighting standards, ensuring better compatibility with global lighting technologies and safety benchmarks.
Withdrawal of Older Standards: The previous versions of these lighting standards will be officially withdrawn on 2 August 2026. After this date, manufacturers and importers must comply only with the revised versions.
Concurrent Validity Period: BIS has provided a transition or concurrent validity period from 2 February 2026 to 2 August 2026 . During this period, Both old and new standards remain valid
Compliance Implications for Businesses: Lighting manufacturers, importers, and BIS licence holders should review the updated BIS standards for lighting and ensure that their products meet the latest Indian lighting safety standards before the transition deadline.

Also Read: BIS LED Lamp IS 16102 Certification Guidelines and Compliance Deadline 2026

Transition Timeline for the New Lighting Standards

To help manufacturers and importers adapt to the updated regulations, the Bureau of Indian Standards (BIS) has provided a transition period before the previous standards are withdrawn. This allows businesses sufficient time to update product testing, documentation, and certification to comply with the latest BIS lighting standards.

Timeline	Compliance Status
2 February 2026	New BIS lighting standards officially come into effect
February – August 2026	Both old and new standards remain valid (transition period)
2 August 2026	Previous standards are officially withdrawn and replaced

This transition timeline is extremely important for manufacturers and importers of lighting products. During this period, companies must review the updated standards, conduct necessary product testing, and update their BIS certification to meet the revised requirements. Businesses that fail to transition before the compliance deadline for BIS lighting standards may face regulatory challenges, delays in certification, or restrictions in selling lighting products in the Indian market.

Major Standards Updated in This Notification

One of the most significant updates in the recent notification issued by the Bureau of Indian Standards (BIS) is the revision of IS 10322, which governs safety and performance requirements for lighting fixtures used across residential, commercial, and infrastructure applications.

1. IS 10322 – Lighting Fixtures (Luminaires)

One of the key standards revised in the latest notification issued by the Bureau of Indian Standards (BIS) is IS 10322, which specifies the safety and testing requirements for luminaires (lighting fixtures) used in residential, commercial, and infrastructure lighting applications.

The revised standard introduces updated safety requirements, testing procedures, and technical specifications to ensure improved product safety and alignment with modern lighting technologies.

Standard	Version
Previous Standard	IS 10322 (Part 1) : 2014
Updated Standard	IS 10322 (Part 1) : 2026

2. Sections Covered Under IS 10322

The standard is divided into multiple sections covering different categories of lighting fixtures:

Section	Product Type
Section 1	Fixed general purpose luminaires
Section 2	Recessed luminaires
Section 3	Road and street lighting luminaires
Section 4	Portable luminaires
Section 5	Floodlights
Section 6	Hand lamps
Section 7	Lighting chains (decorative lights)
Section 8	Emergency lighting luminaires
Section 18	Swimming pool luminaires

All these sections have been updated to the 2026 version, and the previous versions will be withdrawn on 2 August 2026, making it necessary for manufacturers and importers to comply with the latest BIS luminaires standards.

3. IS 16102 – LED Lamps for General Lighting

IS 16102 specifies the safety and performance requirements for self-ballasted LED lamps used in residential and commercial lighting applications. This standard ensures that LED lamps sold in India meet essential safety, efficiency, and durability criteria set by the Bureau of Indian Standards.

The standard is divided into two key parts:

Part 1 – Safety Requirements: Covers electrical safety, insulation, protection against fire hazards, and other safety parameters to ensure safe operation of LED lamps.
Part 2 – Performance Requirements: Defines performance criteria such as luminous efficiency, energy consumption, durability, and product life to maintain consistent lighting quality and efficiency.

The 2026 revision of IS 16102 replaces earlier versions released in 2012 (Part 1) and 2017 (Part 2), introducing updated technical and testing requirements for LED lamps.

4. IS 16614 – Linear LED Lamps

IS 16614 applies to double-capped LED linear lamps, which are commonly used as LED tube lights in homes, offices, and commercial spaces. The updated standard introduces improved safety requirements and revised testing methods to ensure better product reliability and compliance with modern lighting technologies.

Steps Companies Should Take Before August 2026

To ensure smooth compliance with the updated standards issued by the Bureau of Indian Standards (BIS), manufacturers and importers should take the following steps before the transition deadline.

Step	Action Required
Review Updated Standards	Carefully study the revised BIS standards such as IS 10322, IS 16102, and IS 16614 to understand the new requirements.
Conduct Gap Analysis	Compare existing products with the updated standards to identify compliance gaps.
Update Product Testing	Obtain revised test reports from BIS-recognized laboratories based on the new standards.
Apply for License Updates	Update or modify the existing BIS certification/licence where required.
Align Future Production	Ensure that all new production complies with the latest BIS lighting standards before the transition deadline.

How Absolute Veritas Can Help with BIS CRS Compliance

With the introduction of the updated lighting standards by the Bureau of Indian Standards (BIS), manufacturers and importers must ensure that their products comply with the revised requirements before the transition deadline. Navigating updated regulations, testing procedures, and certification requirements can often be complex, especially for businesses dealing with multiple lighting product categories.

Absolute Veritas assists manufacturers and importers in achieving smooth and efficient BIS compliance for lighting products. Our team provides end-to-end support throughout the certification process, helping businesses understand the updated standards and align their products with the latest regulatory requirements.

Our BIS compliance services include:

Guidance on updated BIS lighting standards such as IS 10322, IS 16102, and IS 16614
Assistance with BIS certification for luminaires, LED lamps, and LED tube lights
Coordination with BIS-recognized laboratories for product testing
Support with documentation, application filing, and licence updates
Regulatory advisory for manufacturers and importers entering the Indian market

Connect with us now to get expert consultation and seamless CRS Certification support across India. For more information please contact us at cs@absoluteveritas.com

Frequently asked questions (FAQ)

What is the transition period for the new BIS lighting standards?

BIS has provided a transition period from 2 February 2026 to 2 August 2026 to help manufacturers and importers adjust to the revised standards. During this period, both the old and new standards remain valid simultaneously, allowing businesses time to update product testing, certification, and documentation. After 2 August 2026, the previous standards will be withdrawn and only the updated standards will be applicable.

Do manufacturers need to update their BIS certification after the new standards are introduced?

Yes, manufacturers holding existing BIS licences may need to update their certification to comply with the revised standards. This may involve reviewing product specifications, conducting updated testing through BIS-recognized laboratories, and updating their BIS licence where required. Ensuring compliance with the latest standards helps manufacturers avoid regulatory issues and maintain uninterrupted market access in India.

Which lighting products require BIS certification in India?

Several lighting products require BIS certification under applicable Indian standards. These include LED bulbs, LED tube lights, luminaires, floodlights, decorative lighting chains, emergency lighting systems, and other lighting fixtures covered under standards such as IS 10322, IS 16102, and IS 16614. Manufacturers and importers must ensure that their products meet the relevant BIS requirements before selling them in India.

How can companies ensure compliance with the updated BIS lighting standards?

Companies can ensure compliance by reviewing the revised standards, conducting product gap analysis, updating testing reports from BIS-recognized laboratories, and updating their BIS certification where required. Working with experienced compliance consultants can also help businesses navigate the certification process more efficiently and ensure timely compliance with the latest regulations.